70778 Fuel Filter/Regulator and Single Line Kit for Sniper in Roadster (Remote Mount)

Fuel Filter/Regulator and Single Line Kit for Sniper in Roadster. This kit mounts the filter/regulator to the frame (Remote Mount) rather than direct to the fuel pump return port.  The nice thing about this setup is it eliminates the need for a long fuel return hose assembly, so only a single fuel line needs to be run from the filter to the Sniper EFI Throttle Body. It is a return-style system but appears return-less from the engine compartment. The regulator is set to 58 psi and is not adjustable. This kit is for use when the HP level is over 470, requiring a 255lph fuel pump and therefore a high flow fuel return. Otherwise you should be using the 70768 kit which mounts the filter/regulator directly to the fuel pump return port. This kit requires two additional fuel hose assemblies: Pump to filter/regulator inlet 70748 (3/8” – 3/8” Quick Connect) and Filter/Regulator return to High Flow Fuel Return 70761 (5/16” Quick Connect to 06AN Female). If you already bought your fuel pump from Factory Five, the outlet is 5/16” – substitute 70749 for 70748 – one end is 5/16” Quick Connect.